Wire rope clamp 12 mm

Wire rope clip 12/13 mm | galvanized

Used for clamping and joining ropes made of steel and synthetic fibers. Used in construction, gardening, and the advertising industry.

Description:

• Clips are used for multi-strand ropes.
• The clip size determines the size of the corresponding rope.
•  In combination with a thimble (the thimble size determines the suitable rope size), you can make an “eye” at the end of the rope, which protects the rope against abrasion and deformation.
• When installing the clips, make sure the loose (shorter end – the so-called “dead” end) is placed towards the rounded part of the clip (U-bolt) and the longer (load-bearing rope) is in the seat (from the side of the clamp nuts). Clip order: first – farthest from the eye, next – middle.
• The distance between the clips and the end of the dead end should be at least the width of the clip base; the cut end of the rope should be secured against wire strands fraying.
• After tightening the clips, load the rope with the maximum load expected during use and re-tighten the nuts.

Technical parameters:

• Material: Steel C15, zinc.
• Nut: M10
• Standard: DIN 741
• Weight: 0.112 kg
• Dimensions: 12/13 x B 47 x C 24 mm (see picture)